 |
| Quantity: | |
|---|---|
ZAX10 C600
zte
ZTE ZXA10 C600 is a high-performance fiber access device. It supports GPON and EPON fiber access modes to meet different network requirements. It supports up to 16 PON ports, and each PON port supports up to 128 ONU access, which can meet the needs of large-scale broadband access. It has a maximum switching capacity of 1.2Tbps and supports multiple flow control methods to achieve efficient flow management. It also supports IPv4/IPv6 dual protocol stacks, QoS, VLAN, IGMP and other network features to meet the needs of different network applications. It supports CLI, SNMP, Web and other management methods to achieve flexible network management. It also has multiple security features such as ACL, SSH, SSL, etc. to achieve efficient security management. It has multiple service interfaces such as GE, 10GE, 40GE, 100GE, etc. to meet different service requirements. It supports multiple redundancy technologies such as STP, RSTP, VRRP, etc. to achieve high-reliability network design. In addition, it also supports a variety of environmental monitoring technologies, such as temperature, humidity, fans, etc., to achieve intelligent equipment management.
In terms of optical modem production testing, for 10G optical modem production testing, if multiple communication standards are considered, different OLTs should be distinguished. C300 does not support XGS-PON, while C600 supports EPON (1.25G), 10G-EPON asymmetric, 10G-EPON symmetric, GPON (2.5G), XG-PON (10G asymmetric), and XGS-PON (10G symmetric). The upstream board of C600 has no fixed slots, and each board supports up to 10G16. The size of the C600 business board, main control board, and upstream board modules are all SFP+ (1.25G is SFP). In addition, ZTE C600 also has boards such as GFCH, GFBH, GFBN, GFBT, GFBL and other 16-port 10G GPON boards. ZTE C600 has its own specific performance in terms of network frequency bands, appearance parameters, hardware parameters, etc.
ZTE C600 generally refers to a large-capacity optical access OLT device of ZTE. The following is its related introduction:
Hardware features
Multiple chassis specifications: There are two chassis options: 11u 19 inches and 11u 21 inches. The size of the 21-inch chassis is 486.1x535x288.5mm, and the size of the 19-inch chassis is 486.1x482.6x288.5mm.
Rich interface configuration: It can support 272/240 xGPON, 10G PON, Any-PON or Combo PON ports. Each of its uplink interface cards can support 16/8 10GE uplinks or 2 100GE uplinks. Each user card can support 16 GPON/XG-PON/XGS-PON/Combo PON/Any-PON ports, or 16 10GE P2P, or 24/48 GE P2P.
Functional features
Powerful access capability: As a large-capacity optical access platform, based on advanced architecture design, it can meet the ultra-high bandwidth access requirements of various services such as 4K/8K, VR, FMC in different scenarios.
Support for multiple generations of PON technology: It is the industry's first platform to support three generations of PON technology, realizing the integration and smooth evolution of different generations of PON technology on the same platform, which can extend the service life of OLT equipment by two times and protect the investment of operators.
Highly integrated chip: It adopts 5-in-1 chip, with 16 ports per chip, which is the highest density chip in the industry, and reduces power consumption by 31.8% compared with similar products.
Built-in blade: It is the industry's first OLT device with built-in blades, with powerful processing power and expansion capabilities, and can flexibly respond to the needs of different business scenarios.
SDN-oriented management: Supporting technologies such as Netconf/YANG and Telemetry, it can realize flexible configuration, management and monitoring of the network, making it easier for operators to build intelligent optical access networks.
Automatic registration system: ZXA10 C600 automatic registration system 2.0, supports multiple types of ONU registration such as XGS-PON, XG-PON, GPON, etc., can adjust the registration speed, VLAN and uplink bandwidth, and is not limited by the production product, plug and play.
Application scenarios
Carrier network: widely used in the FTTH (Fiber To The Home) network construction of telecom operators, providing high-speed and stable broadband access services for a large number of users, meeting users' needs for high-bandwidth services such as high-definition video, online games, video conferencing, etc.
Enterprise campus network: can be used as the core access device of the enterprise campus, providing high-bandwidth and low-latency network connections for the internal office network and production network of the enterprise, supporting the digital transformation and business development of the enterprise.
Data center interconnection: In the interconnection scenario between data centers, ZTE C600 can provide large-capacity and high-reliability optical transmission channels to ensure data synchronization, backup and business migration between data centers.
ZTE ZXA10 C600 is a high-performance fiber access device. It supports GPON and EPON fiber access modes to meet different network requirements. It supports up to 16 PON ports, and each PON port supports up to 128 ONU access, which can meet the needs of large-scale broadband access. It has a maximum switching capacity of 1.2Tbps and supports multiple flow control methods to achieve efficient flow management. It also supports IPv4/IPv6 dual protocol stacks, QoS, VLAN, IGMP and other network features to meet the needs of different network applications. It supports CLI, SNMP, Web and other management methods to achieve flexible network management. It also has multiple security features such as ACL, SSH, SSL, etc. to achieve efficient security management. It has multiple service interfaces such as GE, 10GE, 40GE, 100GE, etc. to meet different service requirements. It supports multiple redundancy technologies such as STP, RSTP, VRRP, etc. to achieve high-reliability network design. In addition, it also supports a variety of environmental monitoring technologies, such as temperature, humidity, fans, etc., to achieve intelligent equipment management.
In terms of optical modem production testing, for 10G optical modem production testing, if multiple communication standards are considered, different OLTs should be distinguished. C300 does not support XGS-PON, while C600 supports EPON (1.25G), 10G-EPON asymmetric, 10G-EPON symmetric, GPON (2.5G), XG-PON (10G asymmetric), and XGS-PON (10G symmetric). The upstream board of C600 has no fixed slots, and each board supports up to 10G16. The size of the C600 business board, main control board, and upstream board modules are all SFP+ (1.25G is SFP). In addition, ZTE C600 also has boards such as GFCH, GFBH, GFBN, GFBT, GFBL and other 16-port 10G GPON boards. ZTE C600 has its own specific performance in terms of network frequency bands, appearance parameters, hardware parameters, etc.
ZTE C600 generally refers to a large-capacity optical access OLT device of ZTE. The following is its related introduction:
Hardware features
Multiple chassis specifications: There are two chassis options: 11u 19 inches and 11u 21 inches. The size of the 21-inch chassis is 486.1x535x288.5mm, and the size of the 19-inch chassis is 486.1x482.6x288.5mm.
Rich interface configuration: It can support 272/240 xGPON, 10G PON, Any-PON or Combo PON ports. Each of its uplink interface cards can support 16/8 10GE uplinks or 2 100GE uplinks. Each user card can support 16 GPON/XG-PON/XGS-PON/Combo PON/Any-PON ports, or 16 10GE P2P, or 24/48 GE P2P.
Functional features
Powerful access capability: As a large-capacity optical access platform, based on advanced architecture design, it can meet the ultra-high bandwidth access requirements of various services such as 4K/8K, VR, FMC in different scenarios.
Support for multiple generations of PON technology: It is the industry's first platform to support three generations of PON technology, realizing the integration and smooth evolution of different generations of PON technology on the same platform, which can extend the service life of OLT equipment by two times and protect the investment of operators.
Highly integrated chip: It adopts 5-in-1 chip, with 16 ports per chip, which is the highest density chip in the industry, and reduces power consumption by 31.8% compared with similar products.
Built-in blade: It is the industry's first OLT device with built-in blades, with powerful processing power and expansion capabilities, and can flexibly respond to the needs of different business scenarios.
SDN-oriented management: Supporting technologies such as Netconf/YANG and Telemetry, it can realize flexible configuration, management and monitoring of the network, making it easier for operators to build intelligent optical access networks.
Automatic registration system: ZXA10 C600 automatic registration system 2.0, supports multiple types of ONU registration such as XGS-PON, XG-PON, GPON, etc., can adjust the registration speed, VLAN and uplink bandwidth, and is not limited by the production product, plug and play.
Application scenarios
Carrier network: widely used in the FTTH (Fiber To The Home) network construction of telecom operators, providing high-speed and stable broadband access services for a large number of users, meeting users' needs for high-bandwidth services such as high-definition video, online games, video conferencing, etc.
Enterprise campus network: can be used as the core access device of the enterprise campus, providing high-bandwidth and low-latency network connections for the internal office network and production network of the enterprise, supporting the digital transformation and business development of the enterprise.
Data center interconnection: In the interconnection scenario between data centers, ZTE C600 can provide large-capacity and high-reliability optical transmission channels to ensure data synchronization, backup and business migration between data centers.
