Views: 0 Author: LIN Publish Time: 2024-04-17 Origin: szlianbai
structure appearance
The MA5800-X7 service subrack has a fan tray on the right side. The subrack can be mounted in the cabinet using ETSI or IEC mounting brackets.
MA5800-X7
Anti-static jack
The ESD jack of the MA5800-X7 maintenance frame is located at the bottom of the fan frame and is used to connect an anti-static wrist strap to prevent damage to the device caused by electrostatic discharge.
Ground wire
The MA5800-X7 subrack has 2 ground points. One on the left side panel and the other in the middle of the mounting bracket on the right side of the subrack.
The power input MA5800-X7 has a noise filter. The center ground of the noise filter is connected to the subrack, known as the chassis ground or protective ground. Safely ground the subrack enclosure to divert induced or leakage currents to ground, And enhance protection against electromagnetic interference.
Use a ground wire to connect the ground point of the subrack enclosure to the ground bar of the telecommunications room or directly to ground. . It is recommended that the grounding resistance of the telecommunications equipment room should be less than 10 ohms. Before grounding the chassis, please refer to local standards.
Click 5800-X7 for detailed configuration
